Installation Intructions:

Windows 95/98/2000 CD Installer Setup
Windows 98 Ricochet USB Manual Setup
Windows ME (Millennium) USB Setup
Windows CE Manual Setup
Windows NT Manual Setup
Macintosh Setup

The Ricochet installation program v4.2 for Windows 95 / 98 / 2000 / NT can be downloaded from here*. (1.9MB zip)
The Macintosh installer is here*. (6.9MB sit Stuffit document)

* The Installer program is provided by the Wireless Web Connect (WWC) Company and may not work properly with any other ISP’s Ricochet Modem

The Basics

When installing your Ricochet modem on a computer with a USB port, be sure that you don't connect the Ricochet modem to your computer until after you have run the CD-ROM installation disk, and you are asked by the installation program to connect the Ricochet modem. If you connect the Ricochet modem before running the installation program you may experience problems, and will need to follow these instructions to fix it.

Once your Ricochet modem is correctly installed, you need to know the following to connect to the Internet:

Number to connect to: 3333
Username and password: These are case-sensitive, and should be all in lower case. You should have been assigned these when you got your modem. If not, call your ISP’s customer service department to be set up with an account.

Troubleshooting

Com Port Problems:
One of the prerequisites for installing a Ricochet modem on your computer is that it must have an available com port. Most computers have Com1 available for serial connections. USB connections are also assigned a Com port. Both serial and USB ports can experience Com port problems, especially if the Com port your Ricochet modem is trying to connect to is also being used by another program. Programs that are known to occasionally create these types of conflicts are HotSync Manager and RealPlayer 6.0. HotSync Manager can simply be turned off to handle the problem. RealPlayer 6.0 may need to be uninstalled completely for the conflict to be resolved.

Re-installing Your Ricochet Modem

If you need to re-install your Ricochet modem, follow these steps:

1.      Turn off your Ricochet modem.
 

2.      Go to Start, Settings, Control Panel, then open up Modems. Highlight the Ricochet modem by clicking on it once. Select Remove. If you have more than one Ricochet modem listed, repeat this for the other Ricochet modems listed. Then click OK and reboot your computer.
 

3.      Once your computer has re-booted, run the CD-ROM installation disk setup program.
 

4.      When asked by the setup program to connect the Ricochet modem, turn it back on and make sure it is properly connected to your computer.